beginners guide to chirp programming baofeng uv-5re

Make sure that you are in Frequency mode again by pushing the orange VFO/MR button and also that you are on the TOP frequency on the dual display, which is Freq A and dial in your favorite repeater or other frequency into the radio. Ok, we have worked through ALL that hard work, and now finally you are ready to program in your favorite repeater. After you have changed the setting don't forget to push MENU again to save the setting.

When you get to that setting push the MENU button again to change the setting, then use the UP/DOWN arrow keys to change it to the desired setting. If you are still in menu mode just push the number #1 and it will take you to the stepping. I personally like to set it to 5.0K but if you are using it for just Ham radio 10.0K is fine. Now that you have reset the radio and changed the voice prompt to English or turned them off completely, you should change the frequency stepping so that you can program in your favorite frequencies. Otherwise I forget and exit out without confirming the change.Īnother Baofeng UV-5R with different packaging I find the little voice prompts helpful to remind me to press the Menu button again to confirm the changed setting.

Then press menu and press the UP arrow to change it to either OFF or up one more to ENG which is English. Don't panic, this is easily fixed as well.

Once you reset all the setting and erase any memory channels that may have been programmed in, you will notice that the radio now talks to you in Chinese. You can do this by pushing the MENU button on the keypad then press 40 to get to that setting.Then press the menu again to change the setting to 'reset all' and press MENU one more time, and everything will be reset. The first thing you are going to want to do is to reset the radio to erase any memory channels that may be programmed in. Resetting the radio from factory default setting If you find that the best way to program the Baofeng UV-5RE is to drive a screwdriver through it with a hammer, you are probably doing it wrong.Ĭlick HERE to get a great deal on a USB Programming cable for your Baofeng RADIO! There are a few steps that do not seem logical, like having to program in the transmit AND receive frequency for each memory channel after you set the offset to negative or positive in the setting, but remember that the Baofeng UV-5R radios were not designed for the ham radio service although they are perfectly legal to use for amateur radio. I watched one video on YouTube and was able to go from that point with NO problems. I don't quite understand what the problem is with programming them by the keypad, although others have reported having problems doing this. Programming the baofeng: USB cable or keypad entry Are you trying to use your Baofeng UV5R as a Police Scanner? Find great deals on Police scanners at Scannermaster and SAVE!

Beginners guide to chirp programming baofeng uv-5re